Getting Started Guide

From C256 Foenix Wiki
Revision as of 08:19, 11 February 2020 by PJW (talk | contribs) (Created page with "= Getting Started Guide = == Installing Drivers == Data and programs can be sent to the C256 Foenix over the USB debug port (the USB port on the right side of the board, nex...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Getting Started Guide

Installing Drivers

Data and programs can be sent to the C256 Foenix over the USB debug port (the USB port on the right side of the board, next to the expansion connector). The debug interface is a USB serial port which requires a driver to be installed on the host system. The drivers for the serial USB device (XR21V1411) can be found at: https://www.maxlinear.com/support/design-tools/software-drivers.

Helpful Tools

Foenix IDE
Blah blah blah
C256Mgr
Blah blah bleeeee blah
64Tass
Blah blah blah

Downloading with the Foenix IDE

Downloading with the C256Mgr

Sample Program: Hello, World!

Retrieved from "https://wiki.c256foenix.com/index.php?title=Getting_Started_Guide&oldid=144"