Difference between revisions of "Getting Started Guide"
Jump to navigation
Jump to search
(Created page with "= Getting Started Guide = == Installing Drivers == Data and programs can be sent to the C256 Foenix over the USB debug port (the USB port on the right side of the board, nex...") |
(No difference)
|
Revision as of 08:19, 11 February 2020
Contents
Getting Started Guide
Installing Drivers
Data and programs can be sent to the C256 Foenix over the USB debug port (the USB port on the right side of the board, next to the expansion connector). The debug interface is a USB serial port which requires a driver to be installed on the host system. The drivers for the serial USB device (XR21V1411) can be found at: https://www.maxlinear.com/support/design-tools/software-drivers.
Helpful Tools
- Foenix IDE
- Blah blah blah
- C256Mgr
- Blah blah bleeeee blah
- 64Tass
- Blah blah blah