Difference between revisions of "VICKY II"
(→VICKY II - the graphics engine) |
(→VICKY II - the graphics engine) |
||
Line 283: | Line 283: | ||
| $AF:040F || $AF:040F || VDMA_DST_STRIDE_H | | $AF:040F || $AF:040F || VDMA_DST_STRIDE_H | ||
|- | |- | ||
− | | $AF:0410 || $AF: | + | | $AF:0410 || $AF:041F || UNDEFINED - RESERVED || ------------------------ |
|- | |- | ||
Line 319: | Line 319: | ||
|- | |- | ||
| $AF:0430 || $AF:0430 || SDMA_STATUS_REG / SDMA_BYTE_2_WRITE | | $AF:0430 || $AF:0430 || SDMA_STATUS_REG / SDMA_BYTE_2_WRITE | ||
+ | |||
+ | |- | ||
+ | | $AF:0431 || $AF:04FF || UNDEFINED - RESERVED || ------------------------ | ||
|- | |- |
Revision as of 11:38, 18 January 2021
VICKY II - the graphics engine
"Vicky" is the name of the graphics engine of the C256 Foenix.
"Vicky II" is the upgraded version of the graphic engines that resides in the FMX Version.
The major difference in between VICKY and VICKY II is the external bus @ 32Bits wide. (VICKY is only 16Bits) The access time has been doubled which allow the chipset to have better access time and overall better performance. It also gave enough room to implement larger resolutions with faster GUI block move.
Part Number: CFP9551
It supports:
- 320x240@60FPS Max Resolution @ 256 Colors (1 Byte per pixel)
- 400x300@60FPS Max Resolution @ 256 Colors (1 Byte per pixel)
- 640x480@60FPS Max Resolution @ 256 Colors (1 Byte per pixel)
- 800x600@60FPS Max Resolution @ 256 Colors (1 Byte per pixel) (GUI mode)
- 32 Sprites with a resolution of 32x32 pixels
- 4 layers of tiles with a resolution of 16x16 pixels for each tile
- Text Mode
During the video layer composition, Vicky has to read 1 line of bitmap (640 pixels), 1 line of tiles for each layer (4x 640 pixels) and all the lines that are part of the 32 Sprites (worst case scenario 32 lines of 32 pixels), that are displayed on that line. Then a composition and priority encoding are done. In order to establish a priority, in other words, to know which pixel will be in front, Vicky needs to store 10 lines of 640 pixels then scan the lot and determine which one will be displayed.
640 + 640 + 640 + 640 + 640 + (32 * 32) = 4224 Pixels are to be read during a single line interval. The pixel rate is 200Mbytes/sec, 5ns, so the overall operation takes 21.12us, without calculating the overhead in the FPGA to go from one process to the other.
The pixel index value $00 is always transparent, regardless if it's bitmap, tile or sprite. The respective values of the first 4 bytes represented in the LUT are thus always ignored.
Despite the fact that there is an ALPHA value in the LUT, it is not supported/used at all.
Vicky Gloabl Memory Map:
Start Address | Stop Address | Register Description | Additional Info |
---|---|---|---|
$AF:0000 | $AF:0000 | MASTER_CTRL_REG_L | Vicky Master Control Registers |
$AF:0001 | $AF:0001 | MASTER_CTRL_REG_H | |
$AF:0002 | $AF:0002 | VKY_RESERVED_00 | |
$AF:0003 | $AF:0003 | VKY_RESERVED_01 | |
$AF:0004 | $AF:0004 | BORDER_CTRL_REG | Border Control Registers |
$AF:0005 | $AF:0005 | BORDER_COLOR_B | |
$AF:0006 | $AF:0006 | BORDER_COLOR_G | |
$AF:0007 | $AF:0007 | BORDER_COLOR_R | |
$AF:0008 | $AF:0008 | BORDER_X_SIZE[5:0] | |
$AF:0009 | $AF:0009 | BORDER_Y_SIZE[5:0] | |
$AF:000A | $AF:000C | UNDEFINED - RESERVED | |
$AF:000D | $AF:000D | BACKGROUND_COLOR_B | Background Control Registers |
$AF:000E | $AF:000E | BACKGROUND_COLOR_G | |
$AF:000F | $AF:000F | BACKGROUND_COLOR_R | |
$AF:0010 | $AF:0010 | VKY_TXT_CURSOR_CTRL_REG | Cursor Control Registers |
$AF:0011 | $AF:0011 | VKY_TXT_RESERVED | |
$AF:0012 | $AF:0012 | VKY_TXT_CURSOR_CHAR_REG | Char used as the Cursor |
$AF:0013 | $AF:0013 | VKY_TXT_CURSOR_COLR_REG | Color Choice for the Cursor |
$AF:0014 | $AF:0014 | VKY_TXT_CURSOR_X_REG_L | Cursor Position X |
$AF:0015 | $AF:0015 | VKY_TXT_CURSOR_X_REG_H | |
$AF:0016 | $AF:0016 | VKY_TXT_CURSOR_Y_REG_L | Cursor Position Y |
$AF:0017 | $AF:0017 | VKY_TXT_CURSOR_Y_REG_H | |
$AF:0018 | $AF:001B | UNDEFINED - RESERVED | |
$AF:001C | $AF:001C | VKY_INFO_CHIP_NUM_L | Vicky Chip Part Number |
$AF:001D | $AF:001D | VKY_INFO_CHIP_NUM_H | |
$AF:001E | $AF:001E | VKY_INFO_CHIP_VER_L | Vicky Chip Version |
$AF:001F | $AF:001F | VKY_INFO_CHIP_VER_H | |
$AF:0020 | $AF:00FF | UNDEFINED - RESERVED | |
$AF:0100 | $AF:0100 | TL0_CONTROL_REG | Tile 0 Register Set |
$AF:0101 | $AF:0101 | TL0_START_ADDY_L | Start Address Within the Video Memory |
$AF:0102 | $AF:0102 | TL0_START_ADDY_M | |
$AF:0103 | $AF:0103 | TL0_START_ADDY_H | |
$AF:0104 | $AF:0104 | TL0_SCROLL_X | |
$AF:0105 | $AF:0105 | TL0_SCROLL_Y | |
$AF:0106 | $AF:0107 | UNDEFINED - RESERVED | |
$AF:0108 | $AF:0108 | TL1_CONTROL_REG | Tile 1 Register Set |
$AF:0109 | $AF:0109 | TL1_START_ADDY_L | Start Address Within the Video Memory |
$AF:010A | $AF:010A | TL1_START_ADDY_M | |
$AF:010B | $AF:010B | TL1_START_ADDY_H | |
$AF:010C | $AF:010C | TL1_SCROLL_X | |
$AF:010D | $AF:010D | TL1_SCROLL_Y | |
$AF:010E | $AF:010F | UNDEFINED - RESERVED | |
$AF:0110 | $AF:0110 | TL2_CONTROL_REG | Tile 2 Register Set |
$AF:0111 | $AF:0111 | TL2_START_ADDY_L | Start Address Within the Video Memory |
$AF:0112 | $AF:0112 | TL2_START_ADDY_M | |
$AF:0113 | $AF:0113 | TL2_START_ADDY_H | |
$AF:0114 | $AF:0114 | TL2_SCROLL_X | |
$AF:0115 | $AF:0115 | TL2_SCROLL_Y | |
$AF:0116 | $AF:0117 | UNDEFINED - RESERVED | |
$AF:0118 | $AF:0118 | TL3_CONTROL_REG | Tile 3 Register Set |
$AF:0119 | $AF:0119 | TL3_START_ADDY_L | Start Address Within the Video Memory |
$AF:011A | $AF:011A | TL3_START_ADDY_M | |
$AF:011B | $AF:011B | TL3_START_ADDY_H | |
$AF:011C | $AF:011C | TL3_SCROLL_X | |
$AF:011D | $AF:011D | TL3_SCROLL_Y | |
$AF:011E | $AF:011F | UNDEFINED - RESERVED | |
$AF:0120 | $AF:013F | UNDEFINED - RESERVED | |
$AF:0140 | $AF:0140 | BM_CONTROL_REG | Bitmap Registers Set |
$AF:0141 | $AF:0141 | BM_START_ADDY_L | Start Address Within the Video Memory |
$AF:0142 | $AF:0142 | BM_START_ADDY_M | |
$AF:0143 | $AF:0143 | BM_START_ADDY_H | |
$AF:0144 | $AF:0144 | BM_X_SIZE_L | Needs to be set to 640 |
$AF:0145 | $AF:0145 | BM_X_SIZE_H | |
$AF:0146 | $AF:0146 | BM_Y_SIZE_L | Needs to be set to 480 |
$AF:0147 | $AF:0147 | BM_Y_SIZE_H | |
$AF:0148 | $AF:014F | BM_RESERVED | |
$AF:0150 | $AF:01FF | UNDEFINED - RESERVED | |
$AF:0200 | $AF:0200 | SP00_CONTROL_REG | Sprite 0 (Highest Priority) |
$AF:0201 | $AF:0201 | SP00_ADDY_PTR_L | Start Address Within the Video Memory |
$AF:0202 | $AF:0202 | SP00_ADDY_PTR_M | |
$AF:0203 | $AF:0203 | SP00_ADDY_PTR_H | |
$AF:0204 | $AF:0204 | SP00_X_POS_L | |
$AF:0205 | $AF:0205 | SP00_X_POS_H | |
$AF:0206 | $AF:0206 | SP00_Y_POS_L | |
$AF:0207 | $AF:0207 | SP00_Y_POS_H | |
$AF:0208 | $AF:020F | SP01 - Sprite 1 | |
$AF:0210 | $AF:0217 | SP02 - Sprite 2 | |
$AF:0218 | $AF:021F | SP03 - Sprite 3 | |
$AF:0220 | $AF:0227 | SP04 - Sprite 4 | |
$AF:0228 | $AF:022F | SP05 - Sprite 5 | |
$AF:0230 | $AF:0237 | SP06 - Sprite 6 | |
$AF:0238 | $AF:023F | SP07 - Sprite 7 | |
$AF:0240 | $AF:0247 | SP08 - Sprite 8 | |
$AF:0248 | $AF:024F | SP09 - Sprite 9 | |
$AF:0250 | $AF:0257 | SP10 - Sprite 10 | |
$AF:0258 | $AF:025F | SP11 - Sprite 11 | |
$AF:0260 | $AF:0267 | SP12 - Sprite 12 | |
$AF:0268 | $AF:026F | SP13 - Sprite 13 | |
$AF:0270 | $AF:0277 | SP14 - Sprite 14 | |
$AF:0278 | $AF:027F | SP15 - Sprite 15 | |
$AF:0280 | $AF:0287 | SP16 - Sprite 16 | |
$AF:0288 | $AF:028F | SP17 - Sprite 17 | |
$AF:0290 | $AF:0297 | SP18 - Sprite 18 | |
$AF:0298 | $AF:029F | SP19 - Sprite 19 | |
$AF:02A0 | $AF:02A7 | SP20 - Sprite 20 | |
$AF:02A8 | $AF:02AF | SP21 - Sprite 21 | |
$AF:02B0 | $AF:02B7 | SP22 - Sprite 22 | |
$AF:02B8 | $AF:02BF | SP23 - Sprite 23 | |
$AF:02C0 | $AF:02C7 | SP24 - Sprite 24 | |
$AF:02C8 | $AF:02CF | SP25 - Sprite 25 | |
$AF:02D0 | $AF:02D7 | SP26 - Sprite 26 | |
$AF:02D8 | $AF:02DF | SP27 - Sprite 27 | |
$AF:02E0 | $AF:02E7 | SP28 - Sprite 28 | |
$AF:02E8 | $AF:02EF | SP29 - Sprite 29 | |
$AF:02F0 | $AF:02F7 | SP30 - Sprite 30 | |
$AF:02F8 | $AF:02FF | SP31 - Sprite 31 | |
$AF:0300 | $AF:03FF | UNDEFINED - RESERVED | ------------------------ |
$AF:0400 | $AF:0400 | VDMA_CONTROL_REG | Video DMA Block |
$AF:0401 | $AF:0401 | VDMA_STATUS_REG | |
$AF:0402 | $AF:0402 | VDMA_SRC_ADDY_L | |
$AF:0403 | $AF:0403 | VDMA_SRC_ADDY_M | |
$AF:0404 | $AF:0404 | VDMA_SRC_ADDY_H | |
$AF:0405 | $AF:0405 | VDMA_DST_ADDY_L | |
$AF:0406 | $AF:0406 | VDMA_DST_ADDY_M | |
$AF:0407 | $AF:0407 | VDMA_DST_ADDY_H | |
$AF:0408 | $AF:0408 | VDMA_SIZE_L / VDMA_X_SIZE_L | |
$AF:0409 | $AF:0409 | VDMA_SIZE_M / VDMA_X_SIZE_H | |
$AF:040A | $AF:040A | VDMA_SIZE_H / VDMA_Y_SIZE_L | |
$AF:040B | $AF:040B | VDMA_RESERVED_0 / VDMA_Y_SIZE_H | |
$AF:040C | $AF:040C | VDMA_SRC_STRIDE_L | |
$AF:040D | $AF:040D | VDMA_SRC_STRIDE_H | |
$AF:040E | $AF:040E | VDMA_DST_STRIDE_L | |
$AF:040F | $AF:040F | VDMA_DST_STRIDE_H | |
$AF:0410 | $AF:041F | UNDEFINED - RESERVED | ------------------------ |
$AF:0420 | $AF:0420 | SDMA_CTRL_REG0 | System DMA Block |
$AF:0421 | $AF:0421 | SDMA_CTRL_REG1 | |
$AF:0422 | $AF:0422 | SDMA_SRC_ADDY_L | |
$AF:0423 | $AF:0423 | SDMA_SRC_ADDY_M | |
$AF:0424 | $AF:0424 | SDMA_SRC_ADDY_H | |
$AF:0425 | $AF:0425 | SDMA_DST_ADDY_L | |
$AF:0426 | $AF:0426 | SDMA_DST_ADDY_M | |
$AF:0427 | $AF:0427 | SDMA_DST_ADDY_H | |
$AF:0428 | $AF:0428 | SDMA_SIZE_L / SDMA_X_SIZE_L | |
$AF:0429 | $AF:0429 | SDMA_SIZE_M / SDMA_X_SIZE_H | |
$AF:042A | $AF:042A | SDMA_SIZE_H / SDMA_Y_SIZE_L | |
$AF:042B | $AF:042B | Ignored / SDMA_Y_SIZE_H | |
$AF:042C | $AF:042C | SDMA_SRC_STRIDE_L | |
$AF:042D | $AF:042D | SDMA_SRC_STRIDE_H | |
$AF:042E | $AF:042E | SDMA_DST_STRIDE_L | |
$AF:042F | $AF:042F | SDMA_DST_STRIDE_H | |
$AF:0430 | $AF:0430 | SDMA_STATUS_REG / SDMA_BYTE_2_WRITE | |
$AF:0431 | $AF:04FF | UNDEFINED - RESERVED | ------------------------ |
$AF:0500 | $AF:05FF | MOUSE_PTR_GRAPH0 | 16x16 Mem Block 0 for Mouse Pointer |
$AF:0600 | $AF:06FF | MOUSE_PTR_GRAPH1 | 16x16 Mem Block 1 for Mouse Pointer |
$AF:0700 | $AF:0700 | MOUSE_PTR_CTRL_REG_L | Mouse Pointer Registers Block |
$AF:0701 | $AF:0701 | MOUSE_PTR_CTRL_REG_H | |
$AF:0702 | $AF:0702 | MOUSE_PTR_X_POS_L | X Absolute Location of the Mouse |
$AF:0703 | $AF:0703 | MOUSE_PTR_X_POS_H | Presently Read Only |
$AF:0704 | $AF:0704 | MOUSE_PTR_Y_POS_L | Y Absolute Location of the Mouse |
$AF:0705 | $AF:0705 | MOUSE_PTR_Y_POS_H | Presently Read Only |
$AF:0706 | $AF:0706 | MOUSE_PTR_BYTE0 | PS2 Mouse Packet Byte 0 |
$AF:0707 | $AF:0707 | MOUSE_PTR_BYTE1 | PS2 Mouse Packet Byte 1 |
$AF:0708 | $AF:0708 | MOUSE_PTR_BYTE2 | PS2 Mouse Packet Byte 2 |
$AF:0709 | $AF:070A | UNDEFINED MOUSE | |
$AF:070B | $AF:070B | C256F_MODEL_MAJOR | |
$AF:070C | $AF:070C | C256F_MODEL_MINOR | |
$AF:070D | $AF:070D | FPGA_DOR (Date of Release) | |
$AF:070E | $AF:070E | FPGA_MOR (Date of Release) | |
$AF:070F | $AF:070F | FPGA_YOR (Date of Release) | |
$AF:0710 | $AF:07FF | UNDEFINED - RESERVED | ------------------------ |
$AF:0800 | $AF:080F | RTC | See the RTC Section for more details |
$AF:0810 | $AF:0FFF | UNDEFINED - RESERVED | ------------------------ |
$AF:1000 | $AF:13FF | SUPERIO | See the Super IO Section for more details |
$AF:1400 | $AF:1F3F | UNDEFINED - RESERVED | ------------------------ |
$AF:1F40 | $AF:1F7F | FG_CHAR_LUT_PTR | Text Foreground Look-Up Table |
$AF:1F80 | $AF:1FFF | BG_CHAR_LUT_PTR | Text Background Look-Up Table |
$AF:2000 | $AF:23FF | GRPH_LUT0_PTR | |
$AF:2400 | $AF:27FF | GRPH_LUT1_PTR | |
$AF:2800 | $AF:2BFF | GRPH_LUT2_PTR | |
$AF:2C00 | $AF:2FFF | GRPH_LUT3_PTR | |
$AF:3000 | $AF:33FF | GRPH_LUT4_PTR | Not Implemented Yet |
$AF:3400 | $AF:37FF | GRPH_LUT5_PTR | Not Implemented Yet |
$AF:3800 | $AF:3BFF | GRPH_LUT6_PTR | Not Implemented Yet |
$AF:3C00 | $AF:3FFF | GRPH_LUT7_PTR | Not Implemented Yet |
$AF:4000 | $AF:40FF | GAMMA_B_LUT_PTR | |
$AF:4100 | $AF:41FF | GAMMA_G_LUT_PTR | |
$AF:4200 | $AF:42FF | GAMMA_R_LUT_PTR | |
$AF:4300 | $AF:4FFF | UNDEFINED - RESERVED | ------------------------ |
$AF:5000 | $AF:57FF | TILE_MAP0 | Tile Map 0 Memory Block |
$AF:5800 | $AF:5FFF | TILE_MAP1 | Tile Map 1 Memory Block |
$AF:6000 | $AF:67FF | TILE_MAP2 | Tile Map 2 Memory Block |
$AF:6800 | $AF:6FFF | TILE_MAP3 | Tile Map 3 Memory Block |
$AF:7000 | $AF:7FFF | UNDEFINED - RESERVED | ------------------------ |
$AF:8000 | $AF:87FF | FONT_MEMORY_BANK0 | FONT Character Graphic Mem |
$AF:8800 | $AF:8FFF | FONT_MEMORY_BANK1 | FONT Character Graphic Mem |
$AF:9000 | $AF:9FFF | UNDEFINED - RESERVED | ------------------------ |
$AF:A000 | $AF:BFFF | CS_TEXT_MEM_PTR | Text Memory Block |
$AF:C000 | $AF:DFFF | CS_COLOR_MEM_PTR | Color Text Memory Block |
Modes
Modes are enabled and disabled via the Vicky Master Control Register at $AF0000 via the control bits:
Mstr_Ctrl_Text_Mode_En | = $01 | Enable the Text Mode |
Mstr_Ctrl_Text_Overlay | = $02 | Enable the Overlay of the text mode on top of Graphic Mode (the Background Color is ignored) |
Mstr_Ctrl_Graph_Mode_En | = $04 | Enable the Graphic Mode |
Mstr_Ctrl_Bitmap_En | = $08 | Enable the Bitmap Module In Vicky |
Mstr_Ctrl_TileMap_En | = $10 | Enable the Tile Module in Vicky |
Mstr_Ctrl_Sprite_En | = $20 | Enable the Sprite Module in Vicky |
Mstr_Ctrl_GAMMA_En | = $40 | Enable the GAMMA correction - The Analog and DVI have different color values, the GAMMA is great to correct the difference |
Mstr_Ctrl_Disable_Vid | = $80 | This will disable the Scanning of the Video information in the 4Meg of VideoRAM hence giving 100% bandwidth to the CPU |
Bitmap Layer
The bitmap is stored anywhere in video RAM, which starts at bank $B0. If the bitmap is supposed to start at $B0:0000, the BM_START_ADDY has to be set to $00:0000.
- BM_CONTROL_REG = $AF0140
- Bit 0 = disable/enable
- Bit 1-3 = Target LUT address located at AF:2000 and up.
- BM_START_ADDY_L = $AF0141
- BM_START_ADDY_M = $AF0142
- BM_START_ADDY_H = $AF0143
Text Layer
This layer is enabled by setting the Vicky master control register at $AF0000 to have bit 1 enabled. To overlay text on a bitmap display set bit 2 enabled. This will ignore the background color so this bitmap image can show thru.
The text layer text itself starts at address $AFA000. At the moment this layer has 128 columns and 64 rows, of these 80 columns and 60 rows are visible on screen at any time. Do remember that Vicky is capable of displaying a border. Its up to the developer to account for the overlap of the border with the text screen and adjust the text position accordingly.
The fore and background color can be set by setting the corresponding bytes for each character starting at $AFC000. The upper 4 bits of every byte specify the foreground of the character and the lower 4 bytes specify the background color. This means that only 16 colors are available for the fore and background each. Both index into the text LUT for either fore or background color.
- Start of text screen = $AFA000
- Start of color screen = $AFC000
- Foreground LUT start = $AF1F40 (4-bytes per entry)
- Background LUT start = $AF1F80 (4-bytes per entry)
LUT
A LUT, namely a Look-Up-Table, stores a selection of colors. 256 colors are supported in the video composition for the bitmap layer. The text overlay LUT is limited to 16 colors for foreground and background colors each. All re selectable out of 16.777.216 colors in the 24 Bit RGB color scheme. The LUT also contains an 8 Bit alpha channel, though it isn't supported. In summary, the LUT has $400 (1024) bytes - and the order for composing it is B -> G -> R -> A.
As an example, if you would want to compose a LUT of 16 base colors, it would look like this:
Address | Hex Values (BGRA) | Decimal RGB Value |
---|---|---|
$AF:2000 | -- Transparent -- | -- Transparent -- |
$AF:2004 | 00 00 00 00 | 0, 0, 0 |
$AF:2008 | FF FF FF 00 | 255, 255, 255 |
$AF:200C | 00 00 88 00 | 0, 0, 136 |
$AF:2010 | EE FF AA 00 | 238, 255, 170 |
$AF:2014 | CC 44 CC 00 | 204, 68, 204 |
$AF:2018 | 55 CC 00 00 | 85, 204, 0 |
$AF:201C | AA 00 00 00 | 170, 0, 0 |
$AF:2020 | 77 EE EE 00 | 119, 238, 238 |
$AF:2024 | 55 88 DD 00 | 85, 136, 221 |
$AF:2028 | 00 44 66 00 | 0, 68, 102 |
$AF:202C | 77 77 FF 00 | 119, 119, 255 |
$AF:2030 | 33 33 33 00 | 51, 51, 51 |
$AF:2034 | 77 77 77 00 | 119, 119, 119 |
$AF:2038 | 66 FF AA 00 | 102, 255, 170 |
$AF:203C | FF 88 00 00 | 255, 136, 0 |
$AF:2040 | BB BB BB 00 | 187, 187, 187 |
Adressing anything in the LUT is achieved by simply dividing the lower 10 bits of target color address by 4.