Video DMA Block

Start Address	Stop Address	Register Description	Additional Info
$AF:0400	$AF:0400	VDMA_CONTROL_REG	VDMA control register Bit Name Purpose $01 VDMA_CTRL_Enable Enabled the VDMA transfer block $02 VDMA_CTRL_1D_2D 0 - 1D (Linear) Transfer, 1 - 2D (Block) Transfer $04 VDMA_CTRL_TRF_Fill 0 - Transfer Src -> Dst, 1 - Fill Destination with "Byte2Write" $08 VDMA_CTRL_Int_Enable Set to 1 to Enable the Generation of Interrupt when the Transfer is over. $10 VDMA_CTRL_SysRAM_Src Set to 1 to Indicate that the Source is the System Ram Memory $20 VDMA_CTRL_SysRAM_Dst Set to 1 to Indicate that the Destination is the System Ram Memory $80 VDMA_CTRL_Start_TRF Set to 1 To Begin Process, Need to Cleared before, you can start another
$AF:0401	$AF:0401	VDMA_STATUS_REG / VDMA_BYTE_2_WRITE	On write, accepts the byte to use in the fill function. On read, this register shows the status of the VDMA: Bit Name Purpose $01 VDMA_STAT_Size_Err If Set to 1, Overall Size is Invalid $02 VDMA_STAT_Dst_Add_Err If Set to 1, Destination Address Invalid $04 VDMA_STAT_Src_Add_Err If Set to 1, Source Address Invalid $80 VDMA_STAT_VDMA_IPS If Set to 1, VDMA Transfer in Progress. Do not attempt to access VRAM while a VDMA is in progress!
$AF:0402	$AF:0402	VDMA_SRC_ADDY_L	24-bit address of the source block (relative to start of video RAM)
$AF:0403	$AF:0403	VDMA_SRC_ADDY_M
$AF:0404	$AF:0404	VDMA_SRC_ADDY_H
$AF:0405	$AF:0405	VDMA_DST_ADDY_L	24-bit address of the source block (relative to start of video RAM)
$AF:0406	$AF:0406	VDMA_DST_ADDY_M
$AF:0407	$AF:0407	VDMA_DST_ADDY_H
$AF:0408	$AF:0408	VDMA_SIZE_L / VDMA_X_SIZE_L	For 1-D DMA, 24-bit size of transfer in bytes. For 2-D, 16-bit width of block
$AF:0409	$AF:0409	VDMA_SIZE_M / VDMA_X_SIZE_H
$AF:040A	$AF:040A	VDMA_SIZE_H / VDMA_Y_SIZE_L	For 2-D transfer, 16-bit height of block
$AF:040B	$AF:040B	VDMA_RESERVED_0 / VDMA_Y_SIZE_H
$AF:040C	$AF:040C	VDMA_SRC_STRIDE_L	Number of bytes per row in a 2-D source block
$AF:040D	$AF:040D	VDMA_SRC_STRIDE_H
$AF:040E	$AF:040E	VDMA_DST_STRIDE_L	Number of bytes per row in a 2-D destination block
$AF:040F	$AF:040F	VDMA_DST_STRIDE_H

VDMA_SRC_ADDY

This 3-byte register is set to the 24-bit address of the first byte of the source block to transfer. It must be an address within video RAM and the address is relative to the start of video RAM ($00:0000 - $3F:FFFF). This address is only used if video RAM is the source of the block. If the VDMA is a fill operation, or the source of the block is in system RAM, this register are not used.

VDMA_DST_ADDY

This 3-byte register is set to the 24-bit address of the first byte destination block. It must be an address within video RAM and the address is relative to the start of video RAM ($00:0000 - $3F:FFFF). This address is only used if video RAM is the destination of the VDMA. If the destination of the transfer is system RAM, this register is not used.

VDMA Size

The size of the block to transfer is specified in one of two ways. For a 1-D or linear transfer (bit VDMA_CTRL_1D_2D in the control register is clear), the size is specified as a 24-bit integer using VDMA_SIZE_L, VDMA_SIZE_M, and VDMA_SIZE_H. If the transfer is a 2-D or block transfer (bit VDMA_CTRL_1D_2D in the control register is set), the size is specified as a 16-bit width stored in VDMA_X_SIZE_L and VDMA_X_SIZE_H, and a 16-bit height stored in VDMA_Y_SIZE_L and VDMA_Y_SIZE_L.

Stride

For a 2-D transfer, there is the notion of a "stride," which is the total number of bytes in a row of a source or destination image. The block being transferred may be narrower than the total image. The stride along with the width of the block tells Vicky how many bytes to skip between rows. Source and destination images can have different widths and therefore different strides. The stride of the source is specified by the two-byte register VDMA_SRC_STRIDE, and the stride of the destination by VDMA_DST_STRIDE.